Automotive: effect

Showing posts with label effect. Show all posts

Wednesday, February 4, 2015

The Effect on Car Engine Parts if Fluid Filled Fullness

There are components in cars requires water or fluid that serves as an intermediary or cooling medium . Such as radiators , brakes , clutch , power steering , engine and transmission . Each has a separate classification , but have one thing in common that the fluid must not be filled too full .

No loss effects , both for the components , and also the surrounding components . Be so because some of the fluid has a very malignant nature . Like being able to grind the paint to cause rust .

In order to keep these things do not happen , follow the provisions of the factory . Fill the fluids to the extent that read Full .

1. Radiator

Without the radiator, the engine will overheat which is also very bad impact . Fill the water tank to the upper limit of the neck . No need to overflowing . Then fill the reservoir tube well to writing full . Do not get too full .

" It could even be water in the reservoir becomes empty due out constantly . s Effect is bad for the radiator , because it could be a shortage of water , " said Sarto Rombe , Machine Head Honda Pondok Pinang , South Jakarta .

2. Battery

Just like a radiator . Battery water will be very hot when the work process , which is charging . This heat will arise when air bubbles . If filled too full , then the battery water will exit through breathing holes in the battery lid . The water that comes out of the can erode the paint on location dripping or falling . If left unchecked , the plate body is also affected by rust .

3. Engine Oil

To monitor the engine oil , must go through the dipstick . Never assume filling oil in large quantities to make the machine more long -lived . " Because the engine will work harder . Friction metal road and sat down with crank journal will be more severe , " he cried .

The next effect , moving heavy machinery that will make the fuel consumption becomes more wasteful , because the gas pedal must be pressed deeper . It is less well known , oil- filled , then the actual sound of the engine so rude . Like the fan is rotating water .

This also applies to the automatic transmission . Avoid charging too full , because the process of tooth movement could be more rugged and heavy . RPM required are also higher , so wasteful of fuel .

4. Brake

Cover where the brake fluid that protrudes into the making of the fluid can not be filled too full . Because it would overflow if the lid is fitted . Almost the same as battery acid , brake fluid if exposed to the paint , it will be dangerous . Paint or plate can be damaged . Therefore , provisions should be content to limit only.

5. Power Steering

" Actually its not a problem if fully charged . Did not make the steering heavier or lighter as well anyway , " added the man who lived in Jatiwaringin , the East Jakarta . However, should remain in the limits recommended by the manufacturer. Vacant space for circulation and cooling the power steering oil .

Do not worry will evaporate , because the fluid is required to have the non-volatile nature . Please note if you are actually reduced . Means there is a leak in the power steering system . Fix if there is damage .